Extruders

Showing 1-24 of 28 item(s)

Heater Cartridge

12V 30W Ceramic Heater Cartridge

€2.07

12V 30W Ceramic Heater Cartridge

Heater Cartridge

12V 40W Ceramic Heater Cartridge

€2.07

12V 40W Ceramic Heater Cartridge

Heater Cartridge

24V 30W Ceramic Heater Cartridge

€2.07

24V 30W Ceramic Heater Cartridge

Heater Cartridge

24V 40W Ceramic Heater Cartridge

€2.07

24V 30W Ceramic Heater Cartridge

Hobbed Bolts & Hobbed Pulleys

BQ MK7 Filament Drive Gear - ø5 mm

€8.26

This MK7 Drive gear with 5 mm bore is typically used in the BQ Witbox 1 3D printer. Compatible with 1.75 mm filament.

BSPT Pneumatische Fitting - 1/8" of M5 x 4mm of 6mm

PTFE Tubing & Accessories

BSPT Push Fit Coupling - 1/8" or M5 x 4 mm or 6 mm

€0.83

BSPT Push Fit Coupling - 1/8" or M5 x 4 mm or 6 mm - used in conjunction with 4 mm or 6 mm PTFE Tubing.

Hobbed Bolts & Hobbed Pulleys

Hobbed Pulley Type 3 - 1 pcs

€4.96

These hobbed pulleys can be used in direct drive filament extruders, but they are also compatible with many other extruder designs.

Hotends

J-Head Aluminum Groovemount Plate

€2.89

Aluminum mounting plate to connect the standard J-Head Nozzle.

Hotends

JHead Mk V-BV Hotend

€45.45

The original J-Head Mk B-BV Hotend, complete with thermistor 100K, 3% for temperature control and resistor for heating up the nozzle. The central bore of 0,35 mm or 0,5 mm allows layer heights from 300 micron to 50 micron.This hotend is compatible with our 1.75 and 3 mm filament..

Hobbed Bolts & Hobbed Pulleys

Mini Hyena Filament Drive Gear - ø5 mm

€9.92

Mini Hyena Filament Drive Gear

Hobbed Bolts & Hobbed Pulleys

MK7 Filament Drive Gear - ø8 mm

€4.96

This MK7 Drive gear with 8 mm bore is typically used in direct-drive extruders with geared stepper motors. Compatible with 1.75 mm filament.

Out-of-Stock

Extruders

MK7 Nozzle 0,4 mm

€6.61

MK7 nozzle with 0.4 mm bore for bq hot-end and other hotends with MK7 nozzles.

View

Hobbed Bolts & Hobbed Pulleys

MK8 Filament Drive Gear - ø5 mm

€4.13

MK8 Drive Gear for direct-drive extruder; central bore of 5 mm.

Rotary push-in fitting QSR-1/8-4 (for witbox)

PTFE Tubing & Accessories

Original jhead - PTFE 1.75 mm Liner

€2.69

Original jhead - PTFE 1.75 mm Liner

PTFE Tubing & Accessories

Original jhead - PTFE 3 mm Liner

€2.69

Original jhead - PTFE 3 mm Liner

Hotends

Original jhead hollow set screw

€2.69

Original jhead hollow set screw

Hotends

Original MK 5 PEEK Nozzle Holder

€16.52

Original MK 5 PEEK Nozzle Holder

PTFE Tubing & Accessories

PTFE Tape 12 m

€1.45

PTFE tape can allow high temperatures (250 degrees should be no problem), which makes is useful for insulating the extruder or avoiding leakage.

PTFE Teflon Tubing 4/6mm voor 1.75/3mm Bowden Extruder

PTFE Tubing & Accessories

PTFE Teflon Tubing - 10 cm

€0.33

PTFE Tubing 2mm x 4mm or 4mm x 6mm, for 1.75mm respectively 3mm filament. You can cut the belt in the desired length with a knive or scissors.

Out-of-Stock

PTFE Tubing & Accessories

PTFE tube kit for DDG Extruder HotEnd

€7.02

This PTFE tube is suitable for the DDG extruder hot-ends (Hephestos 2 and Witbox 2).

View

PTFE Tubing & Accessories

Rotary push-in fitting QSR-1/8-4 (for witbox)

€16.53

Rotary push-in fitting QSR-1/8-4 to be used on the witbox 3D printer in combination with a 4 mm PTFE Tubing.

Out-of-Stock

Extruder Kits

SECOND NOZZLE FOR K8400 - VERTEX 3D PRINTER

€106.61

Contains all necessary parts to convert your single extruder Vertex 3D Printer into a dual extruder printer.

View

Sensors

Thermistor 100K brandless

€1.65

100K ohm Epcos B57560G104F NTC Thermistor

Sensors

Thermistor 100K EPCOS B57560G104F

€2.89

100K ohm Epcos B57560G104F NTC Thermistor