Print Surface

Showing 1-10 of 10 item(s)

3DLac - 1 bus

Print Surface

3DLac - 1 can

€9.09

NOTE: Due to transport limitations this product is only available in Belgium, The Netherlands, Germany, France and Luxembourg for the moment. Instead of using kapton, you can now use 3DLac! Very strong adhesion at 100-110 degrees Celsius.

BuildTak Print Sticker - All sizes

Print Surface

BuildTak Print Sticker - All sizes

€9.50

Surface covering for your 3D printer’s print base, whether heated or non-heated. It improves adherence for printers that use the fused filament fabrication (FFF) process by providing an optimum surface to print on.

Carbon plate - 200 x 200 x 3 mm

Print Surface

Carbon plate - 200 x 200 x 3 mm

€27.07

This carbon fibre plate is a base plate for printing with PLA and ABS. The material sticks very well to the plate when it’s heated. The print gets off easily when the base is cooled down.

Carbon plate - 200 x 314 x 3 mm

Print Surface

Carbon plate - 200 x 314 x 3 mm

€42.98

This carbon fibre plate is a base plate for printing with PLA and ABS. The material sticks very well to the plate when it’s heated. The print gets off easily when the base is cooled down.

Borosilicate Glasplaat - 200 x 200mm

Print Surface

Glasplate - 200 x 220 x 4 mm

€4.96

Glass plate made out of normal glass.

Polyimide Kapton Tape - 5/10/20mm - 33m 100ft

Print Surface

Polyimide Kapton Tape - 5/10/20mm - 33m 100ft

€1.00

Kapton Tape is the perfect solution for printing with ABS and to isolate your not heat-resistant parts.

Polyimide Kapton Tape - 50/100/200mm - 33m 100ft

Print Surface

Polyimide Kapton Tape - 50/100/200mm - 33m 100ft

€2.50

Kapton Tape is the perfect solution for printing with ABS and to isolate your notÂ heat-resistant parts.

Witbox 1 Print Bed

On sale!
-€16.90

Out-of-Stock

Print Surface

Witbox 1 Print Bed

€25.99 €42.89

Cold print bed for your Witbox 1

View

Carbon plate - 200 x 200 x 3 mm

Print Surface

Witbox 2 Print Bed

€55.00

Cold print bed for your Witbox 2

Witbox 2: BuildTak Print...

Print Surface

Witbox 2: BuildTak Print Sticker - 5 pcs.

€70.25

Surface covering for your 3D printer’s print base, whether heated or non-heated. It improves adherence for printers that use the fused filament fabrication (FFF) process by providing an optimum surface to print on.

Product added to wishlist

Product added to compare.

Please accept cookies to help us improve this website