Description
Direct-drive extrusion often requires higher torque ratings, which is where this Kysan geared stepper motor comes in! It comes in the regular NEMA17 dimensions, but provides twice the torque of most stepper motors. The low current rating assures you can use its full torque using a regular stepper driver. Suited for both 1.75mm and 3.0mm filament, in conjunction with our 8mm MK7 drive gear.
Content
1x 1040229 Kysan Geared Stepper motor
1x Wire Connector 1830mm
Datasheet
Dimensions:
Step angle: 1.8°
Rated Voltage: 2.4V
Rated Current: 1.0A
Resistance Per Phase: 2.4 ohm ±10%/Phase
Inductance Per Phase: 3.5 mH ±20%/Phase
Number of Phases: 2
Holding Torque: 9 Kg.cm
Wire Length: 1830mm
Gear Ratio: 1:5.18
Usage & Maintenance
This motor comes with a 6-wire connector. To connect it to a standard 4-wire stepper driver, use only wires 1, 3, 4 and 6.
No reviews